84
Combustion Pot Cleaning
When cleaning the combustion pot, make sure it is completely cold. Vacuum cleaners can be
used if there is cold ash. You must check the combustion pot daily.
Ashtray Cleaning
Remove the ashtray (number 6) as shown in Figure 11.1. Clean and reinsert.
You can do this once a week.
Daily and weekly cleaning;
•
Clean the glass of your boiler with a damp, soft cloth and a surface cleaner.
•
Flammable, explosive, flammable etc. When cleaning your boiler. Do not use
chemicals that may pose a hazard.
• Af
ter 200 hours of operation, please call the technical service for
stove maintenance.
• Do not spray cleaner on painted parts or on fire gate seals
.
The display shows the message
“
Clean
” per
200 hours and the
system gives out an acoustic signal periodically. To stop signalling
access
to the Menu “
Cleaning Reset
”. To access this menu;
Press
the
Set
(
P3
) key once. Use the arrow keys (
P4 / P6
) from the menu
to enter “
Cleaning reset
”
menu with the
set
(
P3
) key. Set the status
to ‘’
on
’’. T
his is possible only in OFF state.
12.
S
AFETY DEVICES
1.
On-off switch
2.
Closed expansion tank
3.
Chimney temperature sensor
4.
Fuel tank temperature sensor
5.
Boiler water temperature sensor
6.
Boiler safety thermostat
7.
Mechanical pressure sensor
8.
Safety valve
9.
Air purifier
Summary of Contents for GT-15
