IFYIL GT-15, User Manual

Page: 67 / 100

66
5. OPERATING
5.1. First Fire
• The pellets feeder, not provide the required amount of pellets in the tank is not full
every first firing. So the pellets tank, make sure that the pellets fall into the pellets
feeder.
• If not successful after several test burn, make sure the correct positioning of the
combustion pot.
• Instead of the igniter is placed in the holes in the burning pot. Burning pot, make
sure it is fully seated.
• Please check. Pellets left over from previous combustion and / or residues, can be an
obstacle to burn pellets stuck to the firing rod. If an abnormality is found again
after these checks, there may be a problem with the boiler components or
installation means correctly.
For warning labels affixed on the boiler, remove before burning
boiler. During the first burning boiler clean room air intake must
be provided.
The smoke and odor of the protective paint on the boiler during
the first combustion is short term, in this case open the doors and
windows.