UK
SmartModul CR2512
11
9 Technical data
132
5,5
26
80
15
45°
153
LED
43
±0,5
±1
106,5
±1
Control systems
\DATEN\100\DB-FORM—PZD/03/12/96
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen
06.11.2014
CR2512
SmartModule
I/O module
digital and analogue
for R 360 system
CANopen
interface
Supply voltage
10...32 V DC
We reserve the right to make technical alterations without prior notice.
CR2512 / page 1
Technical data
4 digital inputs
8 digital/PMW outputs with integrated current measurement
Housing
closed screened metal housing
with flange fastening
Dimensions (l x w x h)
132 x 43 x 153 mm
Installation
by means of 4 M5xL screws to DIN 7500 or DIN 7984
mounting position horizontal or vertical to the mounting wall
Connection
55-pin connector, latched, protected against reverse polarity
type AMP housing or Framatome
AMP junior timer contacts, crimp connection 0.5/2.5 mm²
Weight
0.95 kg
Inputs
4
can be configured as
digital, for positive sensor signals (low side)
and can be used for selecting the node ID offset
Outputs
8
can be configured as
digital, positive-switching (high side)
analogue, PWM channel (PWM value 0 ‰; 50...1000 ‰)
analogue, current-controlled channel (20...1000mA; 80...4000mA)
Switching current per output
max. 4 A
(with / without current monitoring)
Total current
max. 12 A
Supply voltage U
B
10...32 V DC
Current consumption
≤
50 mA
(without external load at 24 V DC)
Operating temperature
– 40...85 °C
Storage temperature
– 40...85 °C
Protection
IP 67
(for inserted plug with individually sealed cores e.g. EC2084)
Interface
CAN interface 2.0 B, ISO 11898
Baud rate
20 Kbits/s...1 Mbit/s
(default setting 125 Kbits/s)
Communication profile
CANopen, CiA DS 301 version 4, CiA DS 401 version 2.1
Node ID (default)
hex 20 (= dec 32)
Status LED
two-colour LED (red/green)
