![background image](http://html1.mh-extra.com/html/ifm/sb03-series/sb03-series_operating-instructions-manual_620580025.webp)
Mechatronic flow sensor
SB1xxx SB2xxx SB3xxx SB4xxx SB5xxx SB6xxx SB7xxx SB8xxx SB9xxx
SB03xx
25
u
Briefly press [●].
w
The unit carries out a reboot.
10.4.7.2 Parameter setting via IO-Link: Device reset
u
Select [Parameter] > [Basic settings].
u
Click on the system command [Restore Factory Settings].
w
The unit carries out a reboot.
10.5 Display
10.5.1 Display standard process value
Use the [SELd] parameter to choose which process value is shown in the display by default.
Selectable values:
•
FLOW: The display shows the current process value for flow.
•
TEMP: The display shows the current process value for temperature.
10.5.1.1 Parameter setting via unit keys: Display standard process value
u
Call up the menu [EF] > [DIS].
u
Select [SELd] and set the standard process value.
10.5.1.2 Parameter setting via IO-Link: Display standard process value
u
Call up [Parameters] > [Display Setting].
u
Select [SELd. Displayed measurement] and set the standard process value.
10.5.2 Display colour setting
The colour of the characters in the display can be set via the parameter [coLr].
With the set parameters rED (red) and GrEn (green), the display is permanently set to one colour. If
the parameters rxou and Gxou are set, the colour of the characters changes depending on the
process value:
OUT1
OUT2
Colour change to…
Parameter setting
r1ou
r2ou
red
G1ou
G2ou
green
When the hysteresis function is set, the colour changes if the process value is above the set point:
SP1
/
SP2
MAW
MEW
Fig. 20: Hysteresis function, [coLr] =
rxou
MAW:
Initial value of the measuring range
MEW:
Final value of the measuring range
SPx:
Switch point
When the window function is set, the colour changes if the process value is within the window section: