![background image](http://html1.mh-extra.com/html/ifm/sb03-series/sb03-series_operating-instructions-manual_620580027.webp)
Mechatronic flow sensor
SB1xxx SB2xxx SB3xxx SB4xxx SB5xxx SB6xxx SB7xxx SB8xxx SB9xxx
SB03xx
27
10.5.4.2 Parameter setting via IO-Link: Display orientation
u
Call up [Parameters] > [Display Setting].
u
Select [diS. Display orientation] and set the clockwise rotation of the display:
•
not rotated.
•
rotated by 180°.
10.5.5 Switch off the display
The process value display can be permanently switched off in the operating mode.
Pressing a key switches the display on. In case of inactivity, the display switches off again after a few
seconds.
The LEDs remain active even if the display is deactivated. Error messages are displayed even if
the display is deactivated.
10.5.5.1 Parameter setting via unit keys: Display off
u
Call up the menu [EF] > [DIS].
u
Select [diS] and set OFF.
10.5.5.2 Parameter setting via IO-Link: Display off
u
Call up [Parameters] > [Display Setting].
u
Select [diS. Display On / OFF] and set OFF.