![background image](http://html1.mh-extra.com/html/ifm/sb03-series/sb03-series_operating-instructions-manual_620580024.webp)
SB1xxx SB2xxx SB3xxx SB4xxx SB5xxx SB6xxx SB7xxx SB8xxx SB9xxx SB03xx
Mechatronic flow
sensor
24
10.4.5.1 Parameter setting via unit keys: Measured value damping
u
Call up the menu [EF] > [CFG].
u
Select [dAP] and set the damping time in seconds (τ-value 63 %).
u
Select [dAA] and set a damping time in seconds.
10.4.5.2 Parameter setting via IO-Link: Measured value damping
u
Call up [Parameters] > [Damping].
u
Select [dAP] and set the damping time in seconds (τ-value 63 %).
u
Select [dAA] and set a damping time in seconds.
10.4.6 Memory
The unit stores the maximum and minimum measured process values.
Selectable values:
•
[Lo.T]: Minimum value memory for temperature
•
[Hi.T]: Maximum value memory for temperature
It makes sense to delete the memories as soon as the unit operates under normal operating
conditions for the first time.
10.4.6.1 Parameter setting via unit keys: Memory
Show memory:
u
Go to the [EF] > [MEM] menu.
u
Select [Lo.T] or [Hi.T] to read the highest or lowest process value measured.
Clear memory:
u
Go to the [EF] > [MEM] menu.
u
Select [Lo.T] or [Hi.T].
u
Briefly press [●].
u
Keep [▲] and [▼] pressed.
w
[----] is displayed.
u
Briefly press [●].
10.4.7 Device reset
The unit can be reset to factory settings.
We recommend documenting your own settings in the chapter Factory setting before carrying
out a reset.
10.4.7.1 Parameter setting via unit keys: Device reset
u
Select the [EF] menu.
u
Select [rES].
u
Briefly press [●].
u
Keep [▲] or [▼] pressed.
w
[----] is displayed.