![background image](http://html1.mh-extra.com/html/ifm/efector500-py7102/efector500-py7102_operating-instructions-manual_3918318011.webp)
11
UK
8.2 Setting the output signals
8.2.1 Setting the output function
Select [OU1] and set the switching function:
►
[Hno] = hysteresis function / normally open,
[Hnc] = hysteresis function / normally closed,
[Fno] = window function / normally open,
[Fnc] = window function / normally closed�
Select [OU2] and set the output function:
►
[Hno] = hysteresis function / normally open,
[Hnc] = hysteresis function / normally closed,
[Fno] = window function / normally open,
[Fnc] = window function / normally closed�
[dESI] = Output 2 is used as a diagnostic output�
8.2.2 Setting the switching limits
Select [SP1] / [SP2] and set the value at which the output switches�
►
Select [rP1] / [rP1] and set the value at which the output switches back.
►
rPx is always lower than SPx� The unit only accepts values which are lower
than SPx�
8.3 User settings (optional)
8.3.1 Setting the unit of measurement for the system pressure
Select [Uni] and set the unit of measurement:
►
[bAr], [MPA], or [PSI]�
8.3.2 Configuring the display
Select [diS] and set update rate and orientation of the display:
►
[d1]: Update of the measured value every 50 ms�
[d2]: Update of the measured value every 200 ms�
[d3]: Update of the measured value every 600 ms�
[rd1], [rd2], [rd3]: Display like d1, d2, d3; rotated by 180°.
[OFF]: The display is deactivated in the operating mode��