![background image](http://html1.mh-extra.com/html/ifm/efector500-py7102/efector500-py7102_operating-instructions-manual_3918318013.webp)
13
UK
9 Operation
After power on of the supply voltage the unit is in the Run mode (= normal opera
-
tion)� It carries out its measurement and evaluation functions and generates output
signals according to the set parameters�
9.1 Operation indication
� � � � � � � �
Numerical value + LEDs 1 - 3
current system pressure in unit of measurement as
indicated on the label�
LED 7
LED 8
switching status of OUT2
switching status of OUT1
LEDs 4 - 6: not used.
9.2 Read the set parameter values
Press [Mode/Enter] briefly to scroll the parameters�
►
Press [Set] briefly to indicate the corresponding parameter value for 15 s� After
►
another 15 s the unit returns to the Run mode�
9.3 Fault indication
[OL]
overload pressure (measuring range exceeded)
[UL]
underpressure range (measuring range below the minimum value)
[SC1]
short circuit in OUT1*
[SC2]
short circuit in OUT2*
[SC]
short circuit in both switching outputs*
[Err]
internal fault
•
nominal pressure (final value of the measuring range) exceeded by 5
•
times�
*The output concerned is switched off as long as the short circuit continues�
The faults SC1, SC2, SC, Err are indicated even if the display is deactivated.