9
UK
8 Parameter setting
During the parameter setting process the unit remains in the operating mode� It
continues its monitoring function with the existing parameters until parameter set
-
ting has been terminated�
8.1 Parameter setting general
Each parameter setting requires 3 steps:
1
Selecting parameter
Press [Mode/Enter] until the re
-
►
quested parameter is displayed�
���������� ���
2
Setting the parameter value
Press [Set] and keep the buton
►
pressed�
Current setting value of the param-
>
eter bit flashes for 5 s�
After 5 s: Setting value is changed:
>
incremental by pressing briefly or
scrolling by holding pressed�
���������� ���
The numerical values are incremented continuously� If the value is to be reduced: Let
the display move to the maximum setting value� Then the cycle starts again at the
minimum setting value�
3
Acknowledge parameter value
Press [Mode/Enter] briefly�
►
The parameter is displayed again�
>
The new setting value is stored�
���������� ���
Set more parameters:
Start again with step 1�
►
Finishing parameter setting:
Press [Mode/Enter] several times until the current measured value is displayed
►
or wait for 15 s� The unit returns to the operating mode if no button is pressed for
over 15 s after acknowledgement of the new parameter value.
