Adjustable parameters
26
Technical information / Functioning / Parameters
Switch-on point
Upper limit value at which the output changes its switching
status.
SP1 is active only if
OU1
=
Hno
,
Hnc
,
Fno
or
Fnc.
Switch-off point 1 / 2
Lower limit value at which the output changes its switching status.
rP1 is always lower than SP1. The unit only accepts values which
are lower than SP1.
Changing the switch-on point also changes the switch-off point
(the distance between SP1 and rP1 remains constant).
If the distance is higher than the new switch point, it is auto-
matically reduced (rP1 is set to the minimum setting value).
rP1 is active only if
OU1
=
Hno
,
Hnc
,
Fno
or
Fnc.
Setting range
:
Configuration of output 1
4 switching functions and the diagnostic function can be set:
-
Hno
= hysteresis / normally open
-
Hnc
= hysteresis / normally closed
-
Fno
= window function / normally open
-
Fnc
= window function / normally closed
-
dESI
= Output 1 is used as a diagnostic output
in steps of
mbar
kPa
PSI
1
-248 ... 250
-250 ... 248
-24.8 ... 25.0
-25.0 ... 24.8
-3.61 ... 3.63
-3.63 ... 3.60
SP1
rP1
0.1
0.01
Configuration of output 2
4 analogue signals can be set:
-
I
= current output 4 ... 20 mA
-
InEG
= current output inverted 20 ... 4 mA
-
U
= voltage output 0 ... 10 V
-
UnEG
= voltage output inverted 10 ... 0 V