36
Configuration of the analogue input
2 settings can be selected:
-
I
= analogue current signal (max. range 0.00 ... 20.00 mA).
-
U
= analogue voltage signal (max. range 0.00 ... 10.00 V).
Factory preset =
U.
Initial value for the input signal
Setting range: 0.00 ... 10.00 mA (for InP2 = I) / 0.00 ... 5.00 V
(for InP2 = U).
Final value for the input signal
Setting range: 10.00 ... 20.00 mA (for InP2 = I) / 5.00 ... 10.00 V
(for InP2 = U).
Minimum range ILP2 - IHP2 = 50% of the maximum value of
IHP2.
Maximum value for the influence on the basic settings by
the input signal (P2)
Pressure value to which the final value of the analogue signal set
in IHP2 is to correspond.
Setting range: +/- final value of the measuring range of the basic
unit.
Display mode
3 settings can be selected:
- P1
= system pressure is displayed.
- P2
= value at the analogue input is displayed (scaled with the
value set in IEP2)
- P1-2
= difference between P1 and P2.
The unit set in
Uni
applies to all settings.
Enhanced functions
This menu item contains a submenu with additional parameters.
You can access these parameters by pressing the SET button
briefly.
Configuration of the outputs
4 switching functions can be set:
-
Hno
= hysteresis / normally open
-
Hnc
= hysteresis / normally closed
-
Fno
= window function / normally open
-
Fnc
= window function / normally closed
