Programming
Timeout:
If no button is pressed for 15 s during the setting procedure, the unit
returns to the Run mode with unchanged values.
Locking / Unlocking:
The unit can be electronically locked to prevent
unwanted adjustment of the set parameters: Press both pushbuttons for 10 s
(until
is displayed). To unlock: Press both pushbuttons for 10 s (until
is displayed).
Units are delivered from the factory in the unlocked state.
With the unit in the locked state
is indicated when you try to change
parameter values.
The unit can be programmed before or after installation.
33
ENGLISH
1
Mode/Enter Set
Mode/Enter Set
Mode/Enter Set
Press the
Mode/Enter
button
several times until the
respective
parameter
is displayed.
Press the
Set
button and keep
it pressed. The current
parameter
value flashes
for 5 s,
then
the value
is increased
*
(incremental by pressing briefly or
scrolling by holding pressed).
Press the
Mode/Enter
button
briefly
(= acknowledgement).
The parameter is displayed again,
the set
parameter value
becomes effective
.
2
3
4
Change more parameters:
Start again with step 1.
Finish programming:
Wait for 15 s or press the
Mode/Enter button until the current
measured value is indicated again.
*Decrease the value: Let the display of the parameter value move to the
maximum setting value. Then the cycle starts again at the minimum setting
value.
