![background image](http://html.mh-extra.com/html/ifm/dtm424/dtm424_operating-instructions-manual_620830041.webp)
41
ID tag error codes (updated after read or write access of the ID tag)
0x02
ISO_TAG_ERROR_COM-
MAND_SYNTAX
The command is not detect-
ed. Number of sections is
too high. Example: Format
error.
0x03
ISO_TAG_ERROR_OP-
TION_NOT_ SUPPORTED
The indicated options are
not supported.
0x0F
ISO_TAG_ERROR_OTHER Other error.
0x10
ISO_TAG_ER-
ROR_BLOCK_NOT_ USA-
BLE
The specified section cannot
be used (or was not found).
0x11
ISO_TAG_ER-
ROR_BLOCK_ALREADY_
BLOCKED
The specified section has al-
ready been locked and can-
not be locked again.
0x12
ISO_TAG_ER-
ROR_BLOCK_NOT_ UP-
DATEABLE
The specified section has al-
ready been locked and its
contents cannot be updated.
0x13
ISO_TAG_ER-
ROR_BLOCK_WRITE_
VERIFY
The specified section could
not be programmed normal-
ly (a write verify error oc-
curred).
0x14
ISO_TAG_ER-
ROR_BLOCK_LOCK_ VER-
IFY
The specified section could
not be locked normally (a
lock verify error occurred).
9.1.12 Deactivate antenna
The antenna in the device can be deactivated if the value 0 is written to the object
"Antenna active" (OD index 0x2151). In this case no ID tag is detected any more
since the magnetic field of the device is no longer active.
The antenna is reactivated with the value 1. With the object "Antenna active" it is
possible to prevent interference between two devices placed next to each other by
alternately deactivating the antennas of the two devices.