IFM DTM424 Operating Instructions Manual Download Page 7

Page: 7 / 59

DTM425

Article number:

DTM425

Function:

Read/write head

Type designation:

DTMHF GNRWCOUS03

Type:

M18, non flush mountable

6 Installation

6.1 Notes on the unit installation

[Übersetzung ist nicht mehr

aktuell]

When mounting several RFID units adhere to the minimum distances
between the systems.

Flush mounting of a read/write head in metal reduces the read/write
distance.

Device performance can be affected if positioned in the immediate vicinity
of powerful HF emission sources such as welding transformers or
converters.

6.2 Avoiding interference

[Übersetzung ist nicht mehr

aktuell]

The device generates a modulated electrical field with a frequency of 13.56 MHz.

Avoid interference with data communication:

Do not operate any devices in the vicinity that use the same frequency band.

Such devices are for example frequency converters and switched-mode power
supplies.

If there are other devices in the same frequency band in the vicinity:

The mounting distances between the devices should be as large as possible.

Use the devices in alternating operation.

Switch the HF field of the device on/off.

Summary of Contents for DTM424




























































Search results

Summary of Contents for DTM424

Reviews:

Related manuals for DTM424

Brands by name

Popular brands

IFM DTM424, Operating Instructions Manual

Search results

Summary of Contents for DTM424

Reviews:

Related manuals for DTM424

Brands by name

Popular brands