Installation instructions CANwireless CR3130/CR3131
32
0x5022 1
CAN Receive
Object Mask
(EEPROM)
UInt32
rw
0
CAN receive object mask
(EEPROM)�
This value is used to set the RAM
mask automatically after a device
reset� Combined with the value of
the corresponding receive object
ID it is possible to specify which
CAN message identifiers will be
received during „Realtime mode“
is active�
The bits of this variable have the
following function:
Bits 0 to 28: Mask value
Bits 29 to 31= unused, set to 0
Bit set to 0: don‘t care mode
Bit set to 1: the corresponding
bit in the received identifier has
to match to the setting of the filter
register bit
0x5023 1
CAN Receive
Object Mask
(RAM)
UInt32
rw
0
CAN receive object mask (RAM)�
Combined with the value of the
corresponding receive object
ID it is possible to specify which
CAN message identifiers will
be received during „Realtime
mode“ is active� This value may
be changed dynamically during
operation�
The bits of this variable have the
following function:
Bits 0 to 28: Mask value
Bits 29 to 31= unused, set to 0
Bit set to 0: don‘t care mode
Bit set to 1: the corresponding
bit in the received identifier has
to match to the setting of the filter
register bit
0x5024 1
CAN Receive
Object -
Downsampling
Time (EEPROM)
UInt16
rw
0
These are the preset values at the
device after reset and loaded into
the RAM� Please refer to the CAN
Receive Object - Downsampling
time (RAM)