IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
40
>
9.2.3
Configure IoT interface
33888
Via the IoT interface the AL1340 wil be integrated in the IT network.
Substructure: iotsetup
Avalable data points:
Name
Description
Access
../accessrights
Access rights to the IO-Link master
rw
../smobip
IP address of the LR SMARTOBSERVER
rw
../smobport
Port number of the LR SMARTOBSERVER
rw
../smobinterval
Cycle time for data transmission to LR SMARTOBERVER (value in milliseconds)
rw
../network/dhcp
Configuration of the IP settings of the IoT port
rw
../network/ipaddress
IP address of the IoT port
rw
../network/subnetmask
Subnet mask of the network segment
rw
../network/ipdefaultgateway
IP address of the network gateway
rw
rw ... read and write
Applicable services:
Name
Description
../network/setblock
Write all values of the substructure at once
If the parameter [Access rights] is set to [Modbus TCP + IoT] using IoT and Modbus TCP
projection, then the parameter values set in the Modbus TCP projection software apply.
If the parameter [Access rights] is set to [IoT only] via IoT, then set the parameter [Access
rights] to [Keep settings] in the Modbus TCP projection software.
Changes of the parameter [Access Rights] are only effective after restarting the device
(
→
Firmware: Reboot the device
(
