IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
32
>
9.1.7
Fieldbus: set the length of the process data
54681
To set the length of the process data to be transmitted and the arrangement of the bytes:
►
Select [Fieldbus] menu.
>
The menu page shows the current settings.
►
Set the following parameters as required:
Name
Description
Possible values
[Process data length]
Length of the process input data and process
output data per IO-Link port
2 bytes input
2 bytes output
2 bytes input data, 2 bytes
output data
4 bytes input
4 bytes output
4 bytes input data, 4 bytes
output data
8 bytes input
8 bytes output
8 bytes input data, 8 bytes
output data
16 bytes input
16 bytes output
16 bytes input data,
16 bytes output data
32 bytes input
32 bytes output
32 bytes input data,
32 bytes output data
[Swap]
Arrangement of the bytes in process data
off
as Array of Bytes
on
as Integer16 value; during
an update of the process
data, bytes are exchanged
word by word (input data
and output data)
►
Save changed values on the device.
>
9.1.8
IO-Link ports: Activate data transfer to LR AGENT or
LR SMARTOBSERVER
33690
The user can decide separately for each IO-Link port whether the process data of the connected
IO-Link devices should be transferred to LR AGENT or LR SMARTOBSERVER.
To transfer process data the interface to the LR AGENT or LR SMARTOBSERVER has to be
correctly configured (
→
IoT: Configure the interface to LR AGENT or LR
SMARTOBSERVER
(
To activate / deactivate data transfer:
►
Select [Port x] menu (x = 1...4).
>
The menu page shows the current settings.
►
Set the following parameters as required:
Name
Description
Possible values
[Transmission to LR
Agent
or SMARTOBSERVER]
Transfer of process data of the connected
IO-Link device to LR AGENT oder
LR SMARTOBSERVER
[Disabled]
Transfer process data
[Enabled]
Don't transfer process data
►
Save changed values on the device.
>
