IFM AL1340 Operating Instructions Manual Download Page 36

Page: 36 / 129

IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67

9.1.13

Firmware: Reset device to factory settings

33838

When the IO-Link master is reset, all parameters are set to the factory settings:

To reset the device to factory settings:
►

Select [Firmware] menu.

The menu page shows the current settings.

►

Click on [Factory Reset] to reset the device.

LR DEVICE sets the device to the factory settings.

9.1.14

Firmware: Reboot the device

33832

When rebooting the device, all settings are kept.

To restart the AL1340:
►

Select [Firmware] menu.

The menu page shows the current settings.

►

Click on [Reboot] to reboot the device.

LR DEVICE reboots the ifm IO-Link master.

Summary of Contents for AL1340


































































































































Search results

Summary of Contents for AL1340

Reviews:

Related manuals for AL1340

Brands by name

Popular brands

IFM AL1340, Operating Instructions Manual

Search results

Summary of Contents for AL1340

Reviews:

Related manuals for AL1340

Brands by name

Popular brands