IO-Link Master with EtherCAT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67
24
8
Set-up
Content
Read device and diagnostic information ................................................................................................25
52811
When the supply voltage is switched on, the AL1332 starts with the factory settings. The display
elements signal the current operating mode (
→
Operating and display elements
(
To enable parameter setting of the AL1332, the IoT interface and / or the fieldbus interface must be
configured according to the network environment.
► Configure fieldbus interface (→
Integrate the IO-Link master into the TwinCAT project
(
► Configure IoT interface (LR DEVICE: →
IoT: Configure IP settings
(
) or
→
Configure
IoT interface
(
>
IoT / fieldbus interface has valid settings.
>
User can set the parameters of the AL1332.
Further steps:
Optional: Update firmware of AL1332 (
→
Update firmware
(
Set the parameters of the AL1332 (
→
Configuration
(