![background image](http://html.mh-extra.com/html/ifm/al1332/al1332_operating-instructions-manual_620806095.webp)
IO-Link Master with EtherCAT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67
95
>
Mapping: Port Qualifier (0xF101)
34041
Port Qualifier Information (PQI) contains diagnostic information about the IO-Link port. In addition to
the process data, the IO-Link master sends the PQI to the EtherCAT controller.
Bit
7
6
5
4
3
2
1
0
PVI
DE
DA
DACT
PVO
--
DI2
DI4
Legend:
[DI4]
Signal status of the digital input on pin 4 (if used)
0x0
OFF
0x1
ON
[DI2]
Signal status of the digital input on pin 2 (if used)
0x0
OFF
0x1
ON
[PVO]
Port validity output: Validity of the output data of the IO-Link device
0x0
invalid
0x1
valid
[DACT] Device deactivated: shows if the IO-Link port is configured and can be
used
0x0
activated and can be used
0x1
deactivated or not available
[DA]
Device available: shows if the IO-Link device has been recognised
and if the device is in the "preoperate" or in the "operate" state
0x0
No device
0x1
device detected
[DE]
Device error: shows if an error or a warning occurred; Note: The user
needs to determine the cause of the fault separately via acyclic
services.
0x0
no error
0x1
Error
[PVI]
Port validity input: Validity of the input data of the IO-Link device
0x0
invalid
0x1
valid