![background image](http://html.mh-extra.com/html/ifm/al1332/al1332_operating-instructions-manual_620806066.webp)
IO-Link Master with EtherCAT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67
66
>
9.3.5
Configure cyclic process data
33884
Type and number of cyclic input and output data on the IO-Link ports are defined via the fieldbus
modules (
→
EtherCAT modules
(
)). In the factory settings, all slots are configured with the
module "IOL_4/4_I/O".
To configure the cyclic process data:
Requirements
>
AL1332 is integrated (→
Integrate the IO-Link master into the TwinCAT project
1 Open the device editor
►
In the Solution Explorer: Double-click on the node of the AL1332.
>
The window shows the available configuration options.
►
Select the tab [Slots].
>
The window shows the current configuration of the cyclic data.
2 Assign fieldbus modules
►
In the left half of the table: Select click on slot of the requested IO-Link port.
►
In the right half of the table: Click on the requested fieldbus module.
►
Click on [<] to assign the requested fieldbus module to the slot.
3 Configure more IO-Link ports
►
optional: repeat step 1 for further IO-Link ports.
>
Cyclic data is assigned to the fieldbus slots.
>
The Solution Explorer shows the configured modules as subelements of the device node.
4 Save the project
►
Save the project.