![background image](http://html.mh-extra.com/html/ifm/al1332/al1332_operating-instructions-manual_620806069.webp)
IO-Link Master with EtherCAT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67
69
>
9.3.8
Read IO-Link events
33662
IO-Link Events will be stored in the "Diagnosis History" (
→
Diagnosis History (0x10F3)
(
)).
The IO-Link Master stores a maxiumum of 64 events.
The single events will be stored in a ring buffer. The AL1332 supports the following operation modes
for writing the ring buffer:
Overwrite Mode: If the buffer memory is full, the oldest event will be overwritten by new incoming
events.
Acknowledge Mode: Events will only be overwritten, when they are read and acknowledged.
The configuration is done via sub-index 0x05. The eventsare stored in sub-indexes 0x06...0x46.
>
9.3.9
Configure IO-Link devices
33881
The IO-Link master supports the configuration of the connected IO-Link devices from the EtherCAT
projection software. The parameters of an IO-Link device are set via IO-Link index and subindex. The
number of the configurable parameters depends on the connected IO-Link device.
Available parameters of the IO-Link devices:
→ IO Device Description (IODD) of the IO-Link
device
The user can read and write IO-Link index and subindex using the following methods:
Acyclic communication:
→
Use acyclic services
(