IFM AC1401/02, Device Manual Supplement

Page: 3 / 123

3
ifm Device Manual Supplement: Acyclic data records and Command interface (AC14 and AC4S) 2017 / 09
Content
4.2.7 Command 0x0109
– Set date/time ............................................................................................. 47
4.2.8 Command 0x010A
– Set parameters of the NTP server ............................................................ 49
4.2.9 Command 0x010B
– Read date / time / NTP settings ................................................................ 51
4.2.10 Command 0x010C
– Reboot system .......................................................................................... 52
4.2.11 Command 0x010D
– Read fieldbus info ..................................................................................... 53
4.2.12 Command 0x010F
– Read message text of an OSC entry ........................................................ 54
4.2.13 Command 0x0110
– Display target visualisation ........................................................................ 56
4.3 AS-i master commands ......................................................................................................57
4.3.1 Overview: AS-i master commands ............................................................................................. 58
4.3.2 Error codes of the AS-i master commands ................................................................................. 60
4.3.3 Command 0x0001
– Change parameters of an AS-i slave ........................................................ 63
4.3.4 Command 0x0003
– Project the currrent AS-i network .............................................................. 65
4.3.5 Command 0x0004
– Change LPS .............................................................................................. 66
4.3.6 Command 0x0005
– Change the operating mode of the AS-i master ........................................ 67
4.3.7 Command 0x0006
– Change AS-i slave address ....................................................................... 68
4.3.8 Command 0x0007
– Set the auto address mode of the AS-i master .......................................... 70
4.3.9 Command 0x0009
– Change extended ID1 in the AS-i slave..................................................... 71
4.3.10 Command 0x000A
– Change PCD ............................................................................................. 73
4.3.11 Command 0x000D
– AS-i master supply voltage, symmetry, earth fault .................................... 74
4.3.12 Command 0x0015
– Read ID string of an AS-i profile (S-7.4) .................................................... 76
4.3.13 Command 0x001A
– Read AS-i master info ............................................................................... 79
4.3.14 Command 0x001C
– Deactivate slave reset when changing to the protected mode .................. 80
4.3.15 Command 0x0021
– Read diagnosis string of an AS-i slave (S-7.4) .......................................... 81
4.3.16 Command 0x0022
– Read parameter string of an AS-i slave (S-7.4) ......................................... 83
4.3.17 Command 0x0023
– Write parameter string of an AS-i slave (S-7.4) ......................................... 85
4.3.18 Command 0x0024
– CTT2 Standard .......................................................................................... 87
4.3.19 Command 0x0025
– CTT2 standard write .................................................................................. 89
4.3.20 Command 0x0026
– CTT2 Vendor Specific Read ...................................................................... 91
4.3.21 Command 0x0027
– CTT2 Vendor Specific Write ...................................................................... 93
4.3.22 Command 0x0040
– CTT2 device group read ............................................................................ 95
4.3.23 Command 0x0041
– CTT2 Device Group Write ......................................................................... 97
4.3.24 Command 0x0042
– CTT2 Vendor Specific Selective Read From Buffer .................................. 99
4.3.25 Command 0x0043
– CTT2 Vendor Specific Selective Write From Buffer................................. 101
4.3.26 Command 0x0044
– CTT2 Vendor Specific Selective Read .................................................... 103
4.3.27 Command 0x0045
– CTT2 Vendor Specific Selective Write .................................................... 105
4.3.28 Command 0x0046
– CTT2 device group selective Rread ........................................................ 107
4.3.29 Command 0x0047
– CTT2 Device Group Selective Write ....................................................... 109
4.3.30 Command 0x0049
– CTT2 Vendor Specific Exchange ............................................................ 111
4.3.31 Command 0x004A
– CTT2 Device Group Exchange ............................................................... 113
4.3.32 Command 0x004B
– CTT2 Device Group Selective Read From Buffer ................................... 115
4.3.33 Command 0x004C
– CTT2 Device Group Selective Write From Buffer ................................... 117
4.3.34 Command 0x0050
– Adjust AS-i master settings ..................................................................... 119
4.3.35 Command 0x0051
– Reset error counter ................................................................................. 120
5 Index 121
6 ifm weltweit • ifm worldwide • ifm à l’échelle internationale 123