IFM AC1401/02 Device Manual Supplement Download Page 16

Page: 16 / 123

ifm

Device Manual Supplement: Acyclic data records and Command interface (AC14 and AC4S)

2017 / 09

Acyclic data records

3.3.3

Host flags

7162

The host flags are regularly updated by the host. The AS-i master cyclically checks the host flags for
changes.

The host flags are saved in the following register:

Host Flags

–

DEA

OFF

Legend:

Flag

Designation

Description

Initial value at power-on

OFF

Offline

1 (TRUE): Execution control of the master changes to the

offline mode. The function Set_Offline_Mode()
is implemented via this flag.

0 (FALSE)

DEA

Data_Exchange_Active

1 (TRUE): Data exchange activated between master and

slaves. The function
Set_Data_Exchange_Active() is implemented
via this flag

1 (TRUE)

3.3.4

DAE/EE flags

16935

The DAE/EE flags indicate if the double address detection and the earth fault detection are on.

The DEA/EE flags are saved in the following register:

DAE/EE flags

DAE

active

Legend:

Flag

Designation

Description

Initial value at PowerOn

DAE
active

Double address
detection active

1 (TRUE):
0 (FALSE):

Double address detection is on.
Double address detection is off.

0 (FALSE)

EE active

Earth fault detection is
active

1 (TRUE):
0 (FALSE):

Earth fault detection is on.
Earth fault detection is off.

1 (TRUE)

Summary of Contents for AC1401/02




























































































































Search results

Summary of Contents for AC1401/02

Reviews:

Related manuals for AC1401/02

Brands by name

Popular brands

IFM AC1401/02, Device Manual Supplement

Search results

Summary of Contents for AC1401/02

Reviews:

Related manuals for AC1401/02

Brands by name

Popular brands