IFM Electronic O3D303, Operation Manual

Page: 36 / 72

Seite 36 von 72
9.2.6 "requestSession"
M e t h o d N a m e
requestSession
D e s c r i p t i o n
Request a session-object for access to the configuration and for
changing device operating-mode.
This should block parallel editing and allows to put editing behind
password.
The ID could optionally be defined from the external system, but it
must be the defined format (32char "hex").
If it is called with only one parameter, the device will generate a Ses-
sionID.
The session will start with a default timeout("SessionTimeout" device-
parameter), the timeout can be extended by calling "heartbeat".
The device will stay in RUN-mode.
If password is disabled on the device, the value given as password-
parameter is ignored.
I n p u t P a r a m e t e r s
1. Password: string
2. SessionID: string (optional)
O u t p u t P a r a m e t e r s
1. SessionID: string
9.2.7 "reboot"
M e t h o d N a m e
reboot
D e s c r i p t i o n
Reboot system, parameter defines which mode/system will be booted
I n p u t P a r a m e -
t e r s
1. type of system that should be booted after shutdown :int
0: productive-mode
1: recovery-mode
O u t p u t P a r a -
m e t e r s
1. empty-string (compatibility for classic XmlRPC-Client)
9.2.8 "systemCommand”
M e t h o d N a m e
systemCommand
D e s c r i p t i o n
Performs a generic command on the device.
I n p u t P a r a m e t e r s
1. Command :string
2. Parameter :string
O u t p u t P a r a m e t e r s
1. Output :string