IFM Electronic efector 250 O2D22x Operating Instructions Manual Download Page 37

Page: 37 / 37

Object recognition sensor O2D22x

13 Maintenance, repair and disposal

► Keep the lens window free from soiling .

Soiling may considerably affect the reading result!

► To clean the lens window, do not use any detergents or solvents which might

damage the front glass .

► Do not open the housing as the device does not contain any components which

can be repaired by the user . The device must only be repaired by the manufac-

turer .

► Dispose of the device in accordance with the national environmental regulati-

ons .

14 Approvals/standards

The CE Declaration of Conformity is available at:

www .ifm .com

→ Data sheet search → e.g. O2D220 → Approvals

15 Note on the software

This unit contains (maybe modified) Open Source software, which is subject to

special licensing terms .
For copyright information and licensing terms please refer to:

www .ifm .com/int/GNU
For software subject to the GNU General Public License or the GNU Lesser

General Public License the source code can be requested against payment of the

copying and shipping costs .

The software E2D200 version 3 .0 is required as of firmware version 1030 .

The software is available at:

www .ifm .com

→ Data sheet search → e.g. O2D220 → Download/Software.

Summary of Contents for efector 250 O2D22x






































Search results

Summary of Contents for efector 250 O2D22x

Reviews:

Related manuals for efector 250 O2D22x

Brands by name

Popular brands

IFM Electronic efector 250 O2D22x, Operating Instructions Manual

Search results

Summary of Contents for efector 250 O2D22x

Reviews:

Related manuals for efector 250 O2D22x

Brands by name

Popular brands