Object recognition sensor O2D22x
14
7 Operating and display elements
1
3 x LED green
Active LED
Power (ready for operation display)
Eth (Ethernet connection status)
Con (connection status to the operating program (software))
2
4 x LED yellow
Indication of the switching status; lights when the corresponding input or
output is switched .
LED 1 status indication switching output 1 / switching input 1
LED 2 status indication switching output 2 / switching input 2
LED 3 status indication switching output 3
LED 4 status indication switching output 4
3 4-digit alphanumeric display Indication of the evaluation results, parameters, parameter values, war-
nings and error messages .
4 Programming button "Set"
Setting of the parameter values (scrolling by holding pressed; incremental
by pressing briefly) .
5 Programming button
Mode / Enter
Selection of the parameters and acknowledgement of the parameter
values .
7.1 LED display
● LED green Power: ready for operation display
– lights: ready for operation
– flashes (20 Hz): device fault
– flashes (2 Hz): no application on the device
● LED green Eth: Ethernet connection status
– lights: connection available
– flashes: data traffic
● LED green Con: connection status to operating program
– lights: connection available
● LED yellow 1: switching status indication
– off: switching input 1 / switching output 1 not switched
– on: switching input 1 / switching output 1 switched
– flashes (20 Hz): short circuit switching output 1
● LED yellow 2: switching status indication
