EN - 19
•
On each telescopic rail there are top
and bottom fasteners that allows you to
reposition the rails.
•
Hang the telescopic rail top fasteners
on the side rack level reference wire
and simultaneously press the bottom
fasteners until you clearly hear the
fasteners clip into the side rack level
fixing wire.
•
In order to remove, hold the front
surface of the rail and follow the
previous instructions in reverse.
Frying Kit
Especially designed for the air frying of
foods such as potatoes, chicken and corn
without or with less oil in the oven.
1
b
a
Fix the the handle (b) on the skewer (a) by
screwing clockwise.
b
d c
a
2
Position one of the skewer clamps (c) on
the skewer (a) in contact with the end of the
skewer.
Tighten the screw (d) to fix the position of
the clamp.
3
b
d
e
a
c
1
2
3
Place the frying basket (e) on the skewer
(a), through the center hole (1) and position
it such that the end points of the skewer
clamp move in the holes (2) and (3).
4 b
d
c
e
d
a
c
2
3
Fix the frying basket by positioning the
second skewer clamp (c) on the skewer
(a) such that the end points of the skewer
clamp (c) are inserted in the holes (2) and
(3). Tighten the screw (d).
5
g
f
Fit the skewer grid (f) into the appropriate
rack.
Insert the tip of the skewer (a) into the
skewer hole (g) on the rare wall of the oven
cavity.
Fit the skewer (a) on the skewer grid,
remove the handle (b) and close the oven
door.
Important:
Be sure that the oven is
not operating while performing above
steps.
Important:
The handle (b) must be
re-attached for removing the frying set
after cooking process.
