EN - 17
•
Trays and wire grids can be positioned
on any level from 1 to 5.
•
Telescopic rails can be positioned on
levels T1, T2, 3, 4, 5.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for the turnspit wire
grid positioning with telescopic rails.
****Accessories may vary depending on the
model purchased.
The Deep Tray
The deep tray is best used for cooking
stews.
Put the tray into any rack and push it to the
end to make sure it is placed correctly.
FIRST IN THE WORLD
Hot Air Shield System in Built-in Ovens
The patented hot air shield system prevents
hot air from reaching the end user by
creating an air curtain when the oven door
is opened.
The Meat Probe
The meat probe measures the temperature
inside a roast. Cooking with the meat probe
ensures optimum results for any type of
meat or size of roast.
Placing the meat probe
•
Place the probe before roasting begins.
•
Insert the probe into the side of the roast
so that the point reaches its centre.
•
Insert the entire probe, up to the handle.
•
We recommend that you turn the roast
over half-way through cooking. Bear this
in mind when placing the probe to avoid
problems with it later.
•
The point of the probe must not be
touching a bone or fatty areas of the
joint. Also, it should not be in a hollow
area, which could happen with poultry.
•
Put the roast with the probe already in it
into the oven.
•
Plug the probe into the socket in the
upper left side of the oven.
Using the Meat Probe with the Timer
Plug the probe into the socket in the upper
left side of the oven, the Meat Probe symbol
and “
AUTO
” will appear on the display.
The numbers on the left of the display will
show the current temperature recorded by
the meat probe, while the numbers on the
right show the adjustment temperature. To
adjust the temperature of the meat probe,
press the “
M
” sensor button, then use the
“
-
” and “
+
” buttons to change the value. You
cannot use the cooking timer while the meat
probe is using it.
After some time, the Meat Probe symbol
will remain illuminated, and the current and
recommended temperatures will be shown
on the display. When the recommended
temperature reaches the previously set
level, the oven will automatically switch off,
the timer will sound and “
AUTO
” will flash
on the display. Pressing any button on the
timer will end the audible warning, “
AUTO
”
will continue to flash until the “
-
” and “
+
”
buttons are pressed simultaneously to end
“
AUTO
” mode.
