EN - 18
Auto-cooking functions cannot be activated
when the meat probe is in use.
The Rotisserie
1
. Loosen the screws on the skewer clamps
(
b
) and pull them off the spit. Push the spit
through the chicken, slide the clamps back
on, and stick them into the chicken. Tighten
the screws.
2
. Fit the skewer grid (
c
) into the
appropriate rack.
a
b
b
e
1
2
c
3
. Insert the tip of the skewer (
a
) into the
skewer insertion hole (
d
).
4
. Fit the skewer on the skewer grid,
remove the handle and close the oven door.
The handle (
e
) must only be attached for
removing the chicken after roasting.
a
c
d
3
4
Important:
Make sure the oven is not
in operation while performing these
steps.
Place the grill heat deflector under the
control panel if your oven does not
support closed-door grilling.
The Shallow Tray
The shallow tray is best used for baking
pastries.
Put the tray into any rack and push it to the
end to make sure it is correctly placed.
Wire Rack with Easyfix Full Extension
Telescopic Rail
The telescopic rail extends out fully to allow
easy access to your food.
Telescopic rails
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
Fastening tab
Fastener
•
Positioning of the telescopic rails on the
wire rack is secured with the fastening
tabs on the fasteners.
•
Remove the side runner. See section
“Removal of the wire shelf”.