www.ies-synergy.com
User Manual
DUM016055-EN
6
3. General Safety instructions
NOTICE
SAVE THIS MANUAL
• To ensure proper and safe operation, please read these user instructions carefully and
keep them for future reference.
• This manual contains important instructions for the DC quick charger that shall be followed
during installation, operation and maintenance of the unit.
• This equipment shall be installed, adjusted, and serviced by qualified electrical personnel
familiar with the construction and operation of this type of equipment and associated
hazards.
• The locking key, supplied with unit, should be kept in a secure and known location by an
individual that has read and understands the content of this manual.
• Do not open the front cover at any time while input power is present.
• Do not operate the unit while the cabinet door is opened or unlocked.
Failure to follow these instructions may result in death, serious injury or equipment
damage.
I
WARNING
RISK OF ELECTRIC SHOCK, INJURY, AND/OR BURNING
• Only qualified, trained and authorized people will repair, replace or adjust this equipment.
• Make sure the AC input breaker is OFF and measures 0V after the breaker.
• Do not use this product if the cables (input or output) are frayed, have damaged insulation
or any other signs of damage.
• Do not use this product if the enclosure or the EV connectors are broken, cracked, opened
or show any other indication of damage.
• This equipment employs parts, such as switches and relays, that tend to produce arcs or
sparks and therefore, when used in a garage, locate in a room or enclosure provided for the
purpose or not less than 500mm (18 inches) above the floor.
Failure to follow these instructions can result in death or serious injury
I
CAUTION
RISK OF DAMAGE TO THE TERMINAL
• Do not use this product if the cables (input or output) are frayed, have damaged insulation
or any other signs of damage.
• Do not use this product if the enclosure or the Electrical Vehicle Supply Equipment (EVSE)
connectors are broken, cracked, opened or shows any other indication of damage.
• Do not use a cord extension set or second cable assembly in addition to the cable assembly
for the connection of the EV to the EVSE.
• This equipment is not intended for use in residential environments and may not provide
adequate protection to radio reception in such environments.
Failure to follow these instructions may result in serious injury or equipment damage.