25
STEP 2
•
Center the pointer on the sensor support in relation to the
positioning mark on the media (see Page 18)
IMPORTANT
Do not place the positioning mark under the
pointer (i.e. sensor).
STEP 3
•
Press the
Eject/Test
key and
continue
doing so
while you
lock
the printhead (see Page 23).
This starts the calibration process: The media is drawn into the
printer. The media sensor senses the gap between the
positioning marks and determines the print zone of a given
document.
At the end of this process, the printer correctly positions the
document (and cuts it, if applicable) and is then ready for normal
media printing.
+