29
a) Key
Functions
Eject/Test Key
•
Holding down this key while you switch on the printer
selects the printer test mode.
•
Pressing this key for about two seconds when the
printer is on and ready for printing causes the media
to be advanced to the next print zone.
•
Pressing this key briefly when printing is in progress
interrupts printing (pause) as soon as the current
document is printed. The printer however continues to
accept the data transmitted.
Press the
Eject/Test
key again briefly to resume
printing.
NOTE
Pressing
Eject/Test
Key while locking the
printhead starts the media sensor calibration
process (see Page 24).
