IEI Technology Wafer-8522, User Manual

Page: 80 / 178

WAFER-8522 Motherboard
Figure 5-1)
Step 4: Open the SO-DIMM socket arms . Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See Figure 5-1 )
Step 5: Secure the SO-DIMM . Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket. Step 0:
5.3.2 CF Card Installation
NOTE:
The WAFER-8522 can support CF Type II cards. For the complete
specifications of the supported CF cards please refer to Chapter 2 .
To install a CF Type II card onto the WAFER-8522, please follow the steps below:
Step 1: Locate the CF card socket . Place the WAFER-8522 on an anti-static pad and
locate the CF card.
Step 2: Align the CF card . Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card . Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-2 . Step 0:
Page 66
StockCheck.com