manualshive.com logo in svg

IEI Technology Wafer-8522, User Manual

Share
Download
IEI Technology Wafer-8522 User Manual Download Page 107

 

WAFER-8522 Motherboard 

 

Host & Device

 

  D

EFAULT

 

Both the motherboard onboard IDE controller and 

IDE disk drive are used to detect the type of IDE 

cable used. 

 

Host 

 

The motherboard onboard IDE controller detects 

the type of IDE cable used. 

 

Device 

 

The IDE disk drive to detects the type of IDE cable 

used. 

 

IDE Master and IDE Slave 

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the 

status of the auto detected IDE devices. The following IDE devices are detected and are 

shown in the 

IDE Configuration

 menu: 

 

Primary IDE Master 

 

Primary IDE Slave 

 

Secondary IDE Master 

 

Secondary IDE Slave 

The 

IDE Configuration

 menu (

BIOS Menu 4

) allows changes to the configurations for the 

IDE devices installed in the system. If an IDE device is detected, and one of the above 

listed four BIOS configuration options are selected, the IDE configuration options shown in 

Section 6.3.2.1 

appear.

 

6.3.2.1 IDE Master, IDE Slave 

Use the 

IDE Master

 and 

IDE Slave

 configuration menu to view both primary and 

secondary IDE device details and configure the IDE devices connected to the system.   

 

Page 93

StockCheck.com

Summary of Contents for Wafer-8522



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands