IEI Technology Wafer-8522 User Manual Download Page 122

Page: 122 / 178

WAFER-8522 Motherboard

Disabled

USB function support disabled

2 USB Ports

The USB controller activates 2 USB ports

4 USB Ports

EFAULT

The USB controller activates 4 USB ports

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

The Legacy USB support is automatically detected

and enabled.

USB 2.0 Controller [Enabled]

Use the

USB 2.0 Controller

BIOS option to enable or disable the USB 2.0 controller

Enabled D

EFAULT

USB 2.0 controller enabled

Disabled

USB 2.0 controller disabled

USB2.0 Controller Mode [FullSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed D

EFAULT

The controller is capable of operating at 12Mb/s

HiSpeed

The controller is capable of operating at 480Mb/s

Page 108

StockCheck.com

Summary of Contents for Wafer-8522



















































































































































































Search results

Summary of Contents for Wafer-8522

Reviews:

Brands by name

Popular brands

IEI Technology Wafer-8522, User Manual

Search results

Summary of Contents for Wafer-8522

Reviews:

Brands by name

Popular brands