IEI Technology Wafer-8522, User Manual

Page: 78 / 178

WAFER-8522 Motherboard
o
When working with the WAFER-8522, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the WAFER-8522 DO NOT:
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the WAFER-8522 is properly installed.
All the items in the packing list are present (see Chapter 4 )
A compatible memory module is properly inserted into the slot (see Chapter
2 )
The CF Type II card is properly installed into the CF socket
The jumpers have been properly configured
The WAFER-8522 is installed into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
o
Audio kit
o
Power supply
o
Serial port cables
The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
RS-232 serial communications device
o
USB devices
Page 64
StockCheck.com