IEI Technology TANK-880-Q370 Series, User Manual

Page: 24 / 120

TANK-880-Q370
Page 14
3.1 Installation Precautions
CAUTION:
The TANK-880-Q370 Series has more than one power supply connection
point.
To reduce the risk of electric shock, disconnect all power sources before
installing or servicing theTANK-880-Q370 Series.
During installation, be aware of the precautions below:

Read the user manual
: The user manual provides a complete description of
the TANK-880-Q370 Series, installation instructions and configuration
options.

DANGER! Disconnect Power
: Power to the TANK-880-Q370 Series must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the TANK-880-Q370 Series is opened while the power cord is
still connected to an electrical outlet.

Qualified Personnel
: The TANK-880-Q370 Series must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.

Air Circulation
: Make sure there is sufficient air circulation when installing the
TANK-880-Q370 Series. The TANK-880-Q370 Series’s cooling vents must not
be obstructed by any objects. Blocking the vents can cause overheating of the
TANK-880-Q370 Series. Leave at least 5 cm of clearance around the
TANK-880-Q370 Series to prevent overheating.

Grounding
: The TANK-880-Q370 Series should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the TANK-880-Q370 Series.