IEI Technology TANK-880-Q370 Series, User Manual

Page: 31 / 120

TANK-880-Q370
Page 21
3.5.5 LAN Connectors
The LAN connectors allow connection to an external network.
Step 1: Locate the RJ-45 connectors
. The locations of the RJ-45 connectors are
shown in Figure 1-2 .
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-880-Q370 Series. See Figure 3-11.
Figure 3-11: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
Figure 3-12: RJ-45 Ethernet Connector
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the port is linked. See
Table 3
‑
2 .