IEI Technology TANK-880-Q370 Series User Manual Download Page 33

Page: 33 / 120

TANK-880-Q370

Page 23

3.5.8 DB-9 RS-232/422/485 Serial Port Connectors

The system has three RS-232/422/485 serial port connectors. The pinouts for the serial
ports are listed in the table below.

PIN NO. RS232

RS422

RS485

DCD#

TX-

RXD

TX+

TXD

RX+

DTR#

RX-

GND

DSR#

RTS#

CTS#

RI#

Table 3

‑

3: RS-232/422/485 Connector (COM1~COM3)

Figure 3-15: DB-9 RS-232/422/485 Serial Port Connector

3.6 Internal Peripheral Interface Connectors

3.6.1 iDP Module Installation

Through the IEI iDP converter cards, the iDP connector can support different display
specifications, such as VGA, HDMI, DVI-D, LVDS and DisplayPort. To connect an iDP
module to TANK-880-Q370 Series please follow the instructions below.

Step 1:

Loosen one screw on the front panel and the top six screws, slide the cover

outwards and then lift the cover up gently (Figure 3-16).

Summary of Contents for TANK-880-Q370 Series

























































































































Search results

Summary of Contents for TANK-880-Q370 Series

Reviews:

Related manuals for TANK-880-Q370 Series

Brands by name

Popular brands

IEI Technology TANK-880-Q370 Series, User Manual

Search results

Summary of Contents for TANK-880-Q370 Series

Reviews:

Related manuals for TANK-880-Q370 Series

Brands by name

Popular brands