IEI Technology TANK-600 Series, Manual

Page: 95 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 83
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-600. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the TANK-600 is opened and any of the electrical components are
handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.

Self-grounding : Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.

Use an anti-static pad : When configuring or working with an electrical
component, place it on an antic-static pad. This reduces the possibility of ESD
damage.

Only handle the edges of the electrical component : When handling the
electrical component, hold the electrical component by its edges.
B.1.3 P ro d u c t Dis p o s a l
CAUTION:
Risk of explosion if battery is replaced by and incorrect type. Only
certified engineers should replace the on-board battery.
Dispose of used batteries according to instructions and local
regulations.

Outside the European Union - If you wish to dispose of used electrical and
electronic products outside the European Union, please contact your local
authority so as to comply with the correct disposal method.

Within the European Union
–
The device that produces less waste and is
easier to recycle is classified as electronic device in terms of the European
Directive 2012/19/EU (WEEE), and must not be disposed of as domestic
garbage.