IEI Technology TANK-600 Series, Manual

Page: 33 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 21
3.6.1 AT P o we r Mo d e
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The TANK-600 system turns on automatically when the power is connected.
The AT mode benefits a production line to control multiple systems from a central
management center and other applications including:

ATM

Self-service kiosk

Plant environment monitoring system

Factory automation platform

Manufacturing shop flow
3.6.2 ATX P o we r Mo d e
With the ATX mode selected, the TANK-600 system goes in a standby mode when it is
turned off. The system can be easily turned on via network or a power switch in standby
mode. Remote power control is perfect for advertising applications since the
broadcasting time for each system can be set individually and controlled remotely. Other
possible application includes

Security surveillance

Point-of-Sale (POS)

Advertising terminal
3.7 Cle a r CMOS
If the TANK-600 fails to boot due to improper BIOS settings, the clear CMOS switch clears
the CMOS data and resets the system BIOS information. To do this, adjust the clear
CMOS switch to clear CMOS mode for a few seconds then reinstall the clear CMOS
switch back to keep CMOS mode.
S te p 1:
Locate the clear CMOS switch on the bottom panel ( Figure 3-10 ).