IEI Technology TANK-600 Series, Manual

Page: 40 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 28
Figure 3-17: USB Device Connection
S te p 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.
S te p 0:
3.10.5 VGA Mo n ito r Co n n e c tio n
The TANK-600 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the TANK-600, please follow the instructions below.
S te p 1:
Locate the female DB-15 connector . The location of the female DB-15
connector is shown in Chapter 1 .
S te p 2:
Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3:
Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
TANK-600. See Figure 3-18 .