IEI Technology TANK-600 Series, Manual

Page: 31 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 19
S te p 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them ( Figure 3-7 ).
Figure 3-7: Wall-mounting Bracket
S te p 6:
Insert the four monitor mounting screws (M030*05, P/N : 44043-030051-RS)
provided in the wall mounting kit into the four screw holes on the bottom panel of
the system and tighten until the screw shank is secured against the bottom
panel ( Figure 3-8 ).
S te p 7:
Align the mounting screws on the TANK-600 bottom panel with the mounting
holes on the bracket.
S te p 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the TANK-600 rests securely in the slotted holes ( Figure 3-8 ).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.