IEI Technology PUZZLE-IN001A, User Manual

Page: 41 / 107

PUZZLE-IN001A
Page 31
3.11 Rack Mount
The PUZZLE-IN001A is shipped with two rack mount brackets that could be used to
secure the system to the rack after mounting it with the optional sliding rails. To install the
PUZZLE-IN001A into a rack, please follow the steps below.
WARNING:
The provided rack mount brackets must be used with sliding rails. Using
only the rack mount brackets to mount the system on a rack may cause
damage to the system.
Step 1: Install the rack mount brackets to the sides of the PUZZLE-IN001A by inserting
three retention screws (M4*6) into each bracket ( Figure 3-15 ). Make sure the
screws are tight and on the right positions.
Figure 3-15: Rack Mount Bracket Installation
Step 2: Install the sliding rails according to the instruction came with the sliding rails.
Note: The sliding rails must be purchased separately.
Step 3: Slide the PUZZLE-IN001A all the way into the rack enclosure.
Step 4: Secure the front of the rack mount brackets that are attached to the sides of the
PUZZLE-IN001A to the front of the rack.