IEI Technology PUZZLE-IN001A, User Manual

Page: 33 / 107

PUZZLE-IN001A
Page 23
3.6.1 Bypass Configuration in BIOS
Some PulM modules support bypass. To enable/disable bypass function, configure the
BIOS menu of the PUZZLE-IN001A as described below.
Step 1: Go to Chipset

PCH - IO Configuration

NETWORK Configuration
(Bypass Setting) .
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
PCH-IO Configuration
Auto Power Button Status
[Disable (ATX)]
Status
Restore AC Power Loss [Last State]
> PCI Express Configuration
> SATA And RST Configuration
> NETWORK Configuration (ByPass Setting)
M.2 B Key (M2_1) [SATA]
Device selection
Module B Configuration
[PCIEx4 x 2]
Select AC power state when
power is re-applied after a
power failure.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
Step 2: The Network ByPass Setting menu appears. The model names of the PulM
module installed in the PUZZLE-IN001A are shown.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
Network ByPass setting
Slot_A Model Name
PulM-10G4SF-XL710
Power_ON ByPass Mode [Disabled]
Power_OFF ByPass Mode [Enabled]
Slot_B Model Name
PulM-1G4T-I211-BP
Power_ON ByPass Mode [Disabled]
Power_OFF ByPass Mode [Enabled]
Switch all ByPass Mode to
Enable/Disable after power
on.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.