PUZZLE-IN001A
Page 26
Figure 3-13: PCIe Mini Slot Location
Step 3:
Remove the pre-installed retention screw from the standoff.
Step 4:
Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card
into the socket at an angle of about 20º.
Step 5:
Secure the full-size PCIe Mini card with the retention screw previously removed.
3.8.1 Half-size PCIe Mini Card Installation
The PCIe Mini slot also allows installation of a half-size PCIe Mini card. To install a
half-size PCIe Mini card, please follow the steps below.
Step 1:
Remove the pre-installed retention screw and the standoff from the
motherboard.
Step 2:
Install the previously removed standoff to the screw hole for the half-size PCIe
Mini card.
Step 3:
Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card
into the socket at an angle of about 20º.
Summary of Contents for PUZZLE-IN001A
