IEI Technology PUZZLE-IN001A, User Manual

Page: 27 / 107

PUZZLE-IN001A
Page 17
Step 3: Insert an HDD into the bracket until the HDD is properly connected to the SATA
connector. Secure the HDD with four retention screws (M3*4). See Figure 3-5 .
Figure 3-4: Secure HDD to the Bracket
Step 4: Re-connect the SATA connector module to the motherboard. Make sure the two
positioning studs on the chassis go through the two small holes on the HDD
bracket ( Figure 3-5 ). Secure the bracket to the chassis with three screws
removed previously.
Figure 3-5: HDD Installation
Step 5: Re-install and secure the top cover to the system.