manualshive.com logo in svg

IEI Technology PCISA-6612, User Manual

Share
Download
IEI Technology PCISA-6612 User Manual Download Page 75

 

 

Page 75

 

PCISA -6612 CPU Card 

 

 

 WARNING! 

When installing electronic components onto the PCISA-6612 always take 

anti-static precautions in order to prevent ESD damage to the PCISA-6612 

and other electronic components like the CPU and DIMM modules.

 

4.4.1 Preinstalled Component 

The component listed below is preinstalled on the PCISA-6612. 

 

CPU 

4.4.2 Components to Install 

To install the PCISA-6612, the following components must be installed or connected to the 

PCISA-6612: 

 

DIMM module 

 

Peripheral devices 

4.4.3 DIMM Module Installation 

4.4.3.1 Purchasing the Memory Module 

When purchasing DIMM modules, the following considerations should be taken into 

account:  

 

The DIMM module can support a memory chip with a maximum size of 1GB 

 

The DIMM module can have a frequency of 333MHz or 400MHz 

 

The DIMM can be either single-sided or dual-sided 

Summary of Contents for PCISA-6612





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands