IEI Technology PCISA-6612 User Manual Download Page 123

Page: 123 / 220

Page 123

PCISA -6612 CPU Card

Auto

EFAULT

BIOS auto-detects the current USB.

Floppy

The USB device will be emulated as a floppy drive.

The device can be either A: or B: responding to

INT13h calls that return DL = 0 or DL = 1

respectively.

Forced FDD

Allows a hard disk image to be connected as a

floppy image. This option works only for drives

formatted with FAT12, FAT16 or FAT32.

Hard Disk

Allows the USB device to be emulated as hard disk

responding to INT13h calls that return DL values of

80h or above.

CDROM

Assumes the CD-ROM is formatted as bootable

media. All the devices that support block sizes

greater than 512 bytes can only be booted using this

option.

5.4 PCI/PnP

The

PCI/PnP

menu (

BIOS Menu 14

) configures advanced PCI and PnP settings.

WARNING!

Setting wrong values for the BIOS selections in the PCIPnP BIOS menu

may cause the system to malfunction.

Summary of Contents for PCISA-6612





























































































































































































































Search results

Summary of Contents for PCISA-6612

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-6612, User Manual

Search results

Summary of Contents for PCISA-6612

Reviews:

Brands by name

Popular brands